top of page

We make GEO Easy!
Residential Geothermal Experts
ClimateMaster Equipment Wholesaler
Residential & Commercial Loop Contractor
ClimateMaster Tech Support 

 

  • Instagram
  • Facebook
  • Linkedin

Indiana Geothermal provides geothermal products, custom system designs and hundreds of earth loop installations each year. We work with contractors for product supply, system design, and loop contracting and with Homeowers to connect them with the best in the industry. 

Vertical 

Loops
 

Used extensively where land area is limited or soil conditions prohibit digging more economical horizontal loops. A pair of pipes with a special U-bend assembly at the bottom is inserted into a bored hole that averages between 150 to 250 feet deep per ton of equipment. These holes are then back filled with a special grout solution to ensure good contact with the earth.

Horizontal 

Bore

​

Our horizontal bore allows you to install geothermal ground loops with minimal digging and destruction to you or your customers lawn. 
Reduces ground settling & lawn discoloration caused by digging loops. You can bore under crawl spaces or driveways. 

Pond 

Loops

​

Usually very economical to install. If a pond or lake at least eight feet deep is available, pond loops can utilize the water (rather than soil) to transfer heat to and from the pond. A coiled pipe is placed in the water, which should cover about a half an acre. An average home would require about 900 feet of pipe. Reduced installation costs and high performance are characteristic of this type of loop.

Horizontal 

Loops

​

Installed in areas where soil conditions permit economical excavation. Take up more land area than any other loop type, they are used were space permits. Trenches are normally about five feet deep with multiple pipes placed in the trench at different depths. Normally several hundred feet of trench is required, but where space permits these loops are considered desirable.

Contact
bottom of page